minituft carpet tiles
With their low profile structure, minituft carpet tiles provide a clean minimalist aesthetic. However, due to this structure, greater attention to detail is required during installation to achieve a perfect finish.
In comparison to loop pile and multilevel loop pile products, minituft carpet tiles are less forgiving towards imperfections of the subfloor due to their low profile structure. That’s why the subfloor should be stable and level to ensure that no irregularities are shown through the surface of the finished floor after installation. The unevenness of the subfloor must not be greater than 1 mm measured over a width of 200 cm.
Minituft carpet tiles require extra attention during installation to ensure that the tiles are tightly abutted against each other. Due to their low profile structure, open seams will immediately be visible.
Opposite can only be installed in quarter-turn.
Grind can be installed in quarter-turn, ashlar and brick.
Blaze can be installed in quarter-turn, ashlar and brick.